LVR-EAC-6

LVR-EAC-6 combination louver features stationary drainable louver blades to protect against water penetration and an integral control damper to allow positive shutoff protection of air intake and exhaust openings. The LVR-EAC-6 is available in a wide array of anodized and painted finishes including custom color matching. These units are also available with a variety of factory mounted electric or pneumatic actuators.

Standard Features

• Material: Mill finish 6063-T5 extruded aluminum
• Frame: 6″ deep × 0.081″ (152mm × 2mm) thick channel
• Blades: 37-1/2 and 45° × 0.081″ (2mm) thick combination style
• Screen: 1/2″ × 0.063″ (12.7mm × 1.6mm) expanded and flattened aluminum
• Axles: 1/2″ (13) diameter plated steel hex
• Linkage: Concealed in frame
• Low Leakage Seals: PVC blade edge and flexible metal jamb
• Bearings: Synthetic
• Minimum Size: 12″ × 12″ (305mm × 305mm)
• Maximum Size:
  • Single section
    • 48″ × 96″(1219mm × 2436mm) with low leakage seals
    • 60″ × 96″ (1524mm × 2436mm) without low leakage seals
  • Multiple section: Unlimited

Optional Features

• Factory Finish
  • High Performance Fluoropolymer
  • Prime Coat
  • Baked Enamel
  • Clear Anodize
  • Integral Color Anodize
• Frame Options
  • 1-1/2″ (38) flange frame
  • Custom-size flange
  • Stucco flange
  • Glazing frame
• Installation Hardware
  • Clip Angles
  • Continuous Angles
• Additional Options
  • Alternate bird or insect screens
  • Insulated or non-insulated blank-off panels
  • Filter racks
  • Hinged frame
  • Subframe
  • Head and/or sill flashing
  • Frame closure
  • Net OD (actual size)